LavaTap 3 Speed Central Heating Pump 25/6-130 with Pre-Wired Cable

Product description

The LavaTap 3 Speed Central Heating Pump is a simple, dependable 25/6-130 circulating pump for domestic radiator and underfloor heating systems. A three-position dial on the terminal box sets the speed, so you can match the pump to the size of your system, balance radiators and clear air after filling without any electronics to set up.

Built to the standard 130mm port-to-port length with 1½in BSP (G1½) male threads, it fits the same space and pump valves as the most common UK domestic heating pumps, including 130mm Grundfos UPS 15-50, 15-60 and 25-60 3-speed pumps, and similar 130mm Wilo and DAB pumps. Measure your old pump between its threads before ordering: if it is 130mm, this pump will fit. Manufactured by KeyPlumb (part K11793, model ZL-3001-25/6-130), supplied under our LavaTap range.

Speeds: I = 46W, 3m head; II = 67W, 5m head; III = 93W, 6m head. Maximum flow 55 litres per minute.

Specifications: 230V 50Hz. Maximum head 6m. Water temperature 2°C to 110°C (TF110). IP44, insulation class H, under 45dB(A). CE and UKCA marked. Port-to-port 130mm, 1½in BSP connections. Pump weight 2.38kg.

In the box: pump with power cable pre-wired into the terminal box (bare 3-core tails, no mains plug) and instructions. Pump valves and washers are not included.

Fitting: install with the motor shaft horizontal and the flow arrow in the direction of flow, fill and bleed the system before switching on, and never run the pump dry (no more than 10 seconds without water). Wiring should be done by a competent person. This pump is for closed heating water only; for drinking water or secondary hot water circulation choose the LavaTap bronze hot water circulating pump, and for the lowest running costs choose the LavaTap A-rated central heating pump.