Heatmiser NeoStat V3 Programmable Wired Thermostat (Sapphire Black)

Product description

• Wired 230V room thermostat: Fits a standard 35 mm back box and runs from mains, so it needs no batteries. For a battery wireless stat choose the neoAir V3. Switches a combi or system boiler, zone valve or wiring centre up to 3A
• Replaces your neoStat V2: Same RT2, RT1, A2, A1, N and L terminals as the neoStat V2, so it is a straight swap on the same wiring. Works with a Heatmiser neoHub Gen 2 or Gen 3 and the rest of your neo system
• Works on its own, smarter with a neoHub: Program it on the wall with no hub. Add a neoHub, sold separately, for the neoApp, remote control, Alexa, Google Home and Apple Home, and every neoStat joins the neo mesh
• Room thermostat or hot water time clock: Run it as a thermostat for radiators or wet underfloor heating, or switch it to timer mode with 4 on and off times a day for a hot water cylinder. Not for electric underfloor heating
• Programmable comfort: 5/2 day, 7 day or 24 hour schedules with 4 comfort levels a day, optimum start that learns your warm up time, temperature hold, holiday mode, frost protection and a key lock
• Slim, clear and colour matched: Only 13 mm proud of the wall at 85 x 85 mm, with a white backlit screen and five touch keys, in Glacier White, Sapphire Black or Platinum Silver to match the rest of your neo range
• Floor or remote sensor ready: Use the built in air sensor, a remote air sensor or a floor probe for wet underfloor heating with a floor temperature limit, both sold separately, with degrees C or F display

The Heatmiser NeoStat V3 is a wired, programmable room thermostat for wet central heating and wet underfloor heating. It can also run as a hot water time clock. It is not for electric underfloor heating (choose the neoStat-e for that).

What you need: 230V mains wiring at a standard 35 mm back box. The NeoStat V3 uses the same RT2, RT1, A2, A1, N and L terminals as the neoStat V2, so it swaps straight onto existing wiring. Its volt-free output switches up to 3A, enough for a combi or system boiler, a zone valve or a wiring centre such as the UH8.

On its own it is a full programmable thermostat. Add a Heatmiser neoHub (Gen 2 or Gen 3, sold separately) to control it from the neoApp, from anywhere, and by voice with Alexa, Google Home and Apple Home. Every NeoStat on the system joins the neo mesh, which helps larger homes with many zones.

Choose 5/2 day, 7 day or 24 hour programming with 4 comfort levels a day, or run it non-programmable. Features include optimum start, temperature hold, holiday mode, frost protection (7 to 17 C) and a key lock. In timer mode it gives 4 on and off times a day for a hot water cylinder.

Use the built in air sensor, a remote air sensor or a floor probe with a floor temperature limit for wet underfloor heating (sensors sold separately).

Specifications: 230V AC, volt-free switch 3A max, 5 to 35 C range, 1 C accuracy, white backlit screen, five touch keys, 85 x 85 x 13 mm, 137 g. Available in Glacier White, Sapphire Black and Platinum Silver.

Backed by a 2-year Heatmiser manufacturer warranty.