Heatmiser NeoStat V3 wired thermostat, Glacier White

Product Description

Wired 230V room thermostat: Fits a standard 35 mm back box and runs from mains, so it needs no batteries. For a battery wireless stat choose the neoAir V3. Switches a combi or system boiler, zone valve or wiring centre up to 3A
Replaces your neoStat V2: Same RT2, RT1, A2, A1, N and L terminals as the neoStat V2, so it is a straight swap on the same wiring. Works with a Heatmiser neoHub Gen 2 or Gen 3 and the rest of your neo system
Works on its own, smarter with a neoHub: Program it on the wall with no hub. Add a neoHub, sold separately, for the neoApp, remote control, Alexa, Google Home and Apple Home, and every neoStat joins the neo mesh
Room thermostat or hot water time clock: Run it as a thermostat for radiators or wet underfloor heating, or switch it to timer mode with 4 on and off times a day for a hot water cylinder. Not for electric underfloor heating
Programmable comfort: 5/2 day, 7 day or 24 hour schedules with 4 comfort levels a day, optimum start that learns your warm up time, temperature hold, holiday mode, frost protection and a key lock
Slim, clear and colour matched: Only 13 mm proud of the wall at 85 x 85 mm, with a white backlit screen and five touch keys, in Glacier White, Sapphire Black or Platinum Silver to match the rest of your neo range
Floor or remote sensor ready: Use the built in air sensor, a remote air sensor or a floor probe for wet underfloor heating with a floor temperature limit, both sold separately, with degrees C or F display

The Heatmiser NeoStat V3 is a wired, programmable room thermostat for wet central heating and wet underfloor heating. It can also run as a hot water time clock. It is not for electric underfloor heating (choose the neoStat-e for that).

What you need: 230V mains wiring at a standard 35 mm back box. The NeoStat V3 uses the same RT2, RT1, A2, A1, N and L terminals as the neoStat V2, so it swaps straight onto existing wiring. Its volt-free output switches up to 3A, enough for a combi or system boiler, a zone valve or a wiring centre such as the UH8.

On its own it is a full programmable thermostat. Add a Heatmiser neoHub (Gen 2 or Gen 3, sold separately) to control it from the neoApp, from anywhere, and by voice with Alexa, Google Home and Apple Home. Every NeoStat on the system joins the neo mesh, which helps larger homes with many zones.

Choose 5/2 day, 7 day or 24 hour programming with 4 comfort levels a day, or run it non-programmable. Features include optimum start, temperature hold, holiday mode, frost protection (7 to 17 C) and a key lock. In timer mode it gives 4 on and off times a day for a hot water cylinder.

Use the built in air sensor, a remote air sensor or a floor probe with a floor temperature limit for wet underfloor heating (sensors sold separately).

Specifications: 230V AC, volt-free switch 3A max, 5 to 35 C range, 1 C accuracy, white backlit screen, five touch keys, 85 x 85 x 13 mm, 137 g. Available in Glacier White, Sapphire Black and Platinum Silver.

Backed by a 2-year Heatmiser manufacturer warranty.

Heatmiser NeoStat V3 Programmable Wired Thermostat (Glacier White)

Name: Heatmiser NeoStat V3 Programmable Wired Thermostat (Glacier White)
Brand: Heatmiser
SKU: 600072
Price: 74.99 GBP
Availability: InStock
Rating: 4.79 (14 reviews)

Single Unit

£74. 99

£74 .99

More than 10 available

Trade customer? Log in to see your trade price, or open a trade account.

Free UK delivery over £90Order before 1pm Mon–Fri for same-day dispatch
30-day returnsFree if faulty, damaged or wrong
Secure checkoutApple Pay, Google Pay and all major cards

Product Description

Wired 230V room thermostat: Fits a standard 35 mm back box and runs from mains, so it needs no batteries. For a battery wireless stat choose the neoAir V3. Switches a combi or system boiler, zone valve or wiring centre up to 3A
Replaces your neoStat V2: Same RT2, RT1, A2, A1, N and L terminals as the neoStat V2, so it is a straight swap on the same wiring. Works with a Heatmiser neoHub Gen 2 or Gen 3 and the rest of your neo system
Works on its own, smarter with a neoHub: Program it on the wall with no hub. Add a neoHub, sold separately, for the neoApp, remote control, Alexa, Google Home and Apple Home, and every neoStat joins the neo mesh
Room thermostat or hot water time clock: Run it as a thermostat for radiators or wet underfloor heating, or switch it to timer mode with 4 on and off times a day for a hot water cylinder. Not for electric underfloor heating
Programmable comfort: 5/2 day, 7 day or 24 hour schedules with 4 comfort levels a day, optimum start that learns your warm up time, temperature hold, holiday mode, frost protection and a key lock
Slim, clear and colour matched: Only 13 mm proud of the wall at 85 x 85 mm, with a white backlit screen and five touch keys, in Glacier White, Sapphire Black or Platinum Silver to match the rest of your neo range
Floor or remote sensor ready: Use the built in air sensor, a remote air sensor or a floor probe for wet underfloor heating with a floor temperature limit, both sold separately, with degrees C or F display

Use the built in air sensor, a remote air sensor or a floor probe with a floor temperature limit for wet underfloor heating (sensors sold separately).

Backed by a 2-year Heatmiser manufacturer warranty.

Your Bag

Your cart is empty

Go find the products you like.

Continue shopping

Reviews (14)

Product description

Wired 230V room thermostat: Fits a standard 35 mm back box and runs from mains, so it needs no batteries. For a battery wireless stat choose the neoAir V3. Switches a combi or system boiler, zone valve or wiring centre up to 3A
Replaces your neoStat V2: Same RT2, RT1, A2, A1, N and L terminals as the neoStat V2, so it is a straight swap on the same wiring. Works with a Heatmiser neoHub Gen 2 or Gen 3 and the rest of your neo system
Works on its own, smarter with a neoHub: Program it on the wall with no hub. Add a neoHub, sold separately, for the neoApp, remote control, Alexa, Google Home and Apple Home, and every neoStat joins the neo mesh
Room thermostat or hot water time clock: Run it as a thermostat for radiators or wet underfloor heating, or switch it to timer mode with 4 on and off times a day for a hot water cylinder. Not for electric underfloor heating
Programmable comfort: 5/2 day, 7 day or 24 hour schedules with 4 comfort levels a day, optimum start that learns your warm up time, temperature hold, holiday mode, frost protection and a key lock
Slim, clear and colour matched: Only 13 mm proud of the wall at 85 x 85 mm, with a white backlit screen and five touch keys, in Glacier White, Sapphire Black or Platinum Silver to match the rest of your neo range
Floor or remote sensor ready: Use the built in air sensor, a remote air sensor or a floor probe for wet underfloor heating with a floor temperature limit, both sold separately, with degrees C or F display

Use the built in air sensor, a remote air sensor or a floor probe with a floor temperature limit for wet underfloor heating (sensors sold separately).

Backed by a 2-year Heatmiser manufacturer warranty.

Customer reviews

5 stars: 11 (79%)
4 stars: 3 (21%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

very good

heatmiser products are 1st class 100% recommendation

Very good kit

Neo best on market!

Perfect replacement

I replaced a few of my older model heat miser thermostats with this model and I am very happy with them. Nice modern look and easily installed

Delivered the same day we ordered

Heating control easy to change from a V1 unit that had lasted 7 years.Thanks would thoroughly recommend.

Worthy Upgrade

This replaced a standard thermostat, now have complete control with the ability to program different times and temperatures for the room. Be sure to calibrate the thermostat (one of the many functions available) as the factory settings were some way out.

Good thermostat system

I previously used nest - and was a bit nervous about changing to Heatmiser. We needed to do so as we swapped to underfloor heating, and a zoned system. This thermostat works really well though. Not as fancy as a nest, but very well thought out, and works well. Even the app isn't bad (after getting used to it).

Excellent addition to my central heating system.

Bought this thermostat to control radiators in the bedrooms. It's wirelessly connected to a NeoHub that controls underfloor heating in the rest of the property. Straightforward to install and pair up to the NeoHub. I would recommend that you recalibrate the temperature setting to ensure it is setup correctly (the manual describes how to do this). The NeoHub can be controlled remotely through the internet and a couple of years ago I was able to see the temperature in each room and switch the heating on, whilst crossing from New York to Southampton on the Queen Mary2 ship.

Works great

You can use these as programmable thermostats or programmable timers: I am using 4 (!) of these to control towel rail heaters in bathrooms around the house as programmable timers, to save on power and have something stylish (at least as far as thermostats go!)I am very satisfied: they were easy to install (with the helpful wiring schemes provided in the instructions), I set them up in minutes and they look good I’m a way that does not take away from the nice decor we have in the bathrooms and does not get noticed.I also like how the display turns on when you wave your hand near the buttons.I would definitely recommend.

As a replacement for a failed unit of the same type, great

As a replacement for a failed unit of the same type, great, however as for a new install there are better makes out there at the same price.I would not have used this for a new install as the user interface is a bit clunky and not the easiest to use.Really needs battery back-up for these mains powered ones, all settings lost if you have a power cut.Not as easy to set up when getting them to work via the internet as it may appear from the instructions.Check what else is out there before buying these as a new installation.

Does what it says

Great piece of kit. App is not bad too.

Direct replacement

Thermostat stopped working the old faceplate was ok it was the back box but you can’t buy separately, swapped it out and working fine

Excellent service - items spot on!

Received within half a day and since fitted - all is extremely good

Good product

Timely delivery. Using this for past 8 years and working really well.

Great product with one annoying issue

Many nice features but has problems with keeping the correct temperature.I ordered the Heatmiser wired thermostats as it was an easy swap out of my current wired ones. What you should be aware of is the thermostat needs a recessed receptacle to take the small power supply that sits at the rear of the thermostat so if your current ones are flush mounted you will need to install these first. The set up was very easy and the response time from the phone app that you can download was very fast. The app recognised new thermostats almost instantly. One other great feature is the thermostats can talk to each other so if one is a long way from the hub it can be connected through a nearby thermostat. Great for houses with many floors and thick walls.The down side was the little power supply seems to add a degree of heat so the temp shown is higher than the actual room temp.At first I thought my thermostat was faulty but I tried all three and they exhibited the same behaviour. I did love the slim profile of the thermostat on the wall. Because it uses the power from the cables in the wall it didn’t need batteries.Overall it is very nicely designed with good features but I couldn’t get over the temp readings being higher than they should be so reverted back to my original thermostats.

Your Bag

Have an account?

Your Bag

Total Summary

Product Description

Heatmiser NeoStat V3 Programmable Wired Thermostat (Glacier White)