• Wi-Safe 2 wireless interlink: Links with up to 50 FireAngel Wi-Safe 2 smoke, heat and CO alarms and accessories, so when one alarm sounds they all sound, with no cabling
• Thermoptek multi-sensor: Combines thermal enhancement with optical smoke sensing for a fast response to all fire types in a single alarm, suited to landings, hallways and bedrooms
• 10 year sealed battery: Sealed-for-life Panasonic lithium battery engages automatically once the alarm is fitted to its base plate, so there are no batteries to change during its life
• Certified and approved: Certified to BS EN 14604:2005+AC:2008, LPCB approved (651d/12), UKCA and CE marked, and suitable for Grade F1 installations to BS 5839-6
• Smart Silence and Locate: One large central button tests the alarm, hushes a known false alarm for up to 10 minutes, and silences all but the alarm that detected smoke
• Quick ceiling or wall fit: 132mm x 40.5mm alarm with base plate, 2 screws and fixing plugs and manual, optional locking base plate and a 5 year manufacturer warranty

The FireAngel WST-630T is a battery powered wireless smoke alarm from FireAngel's Wi-Safe 2 range. Its built-in 868 MHz radio interlinks it with up to 50 Wi-Safe 2 smoke, heat and CO alarms and accessories, including mixed systems of mains and battery powered units, so a fire detected in one room sets off every alarm in the network - with no cable runs between rooms.

Detection uses FireAngel's Thermoptek multi-sensor, which combines optical smoke sensing with thermal enhancement: if a rapid rise in temperature is detected, sensitivity increases, giving a fast response to both slow smouldering and fast flaming fires. It suits landings, hallways, bedrooms, living rooms and dining rooms, and is also suitable for mobile homes and caravans. Kitchens should be covered by a Wi-Safe 2 heat alarm.

Power comes from a sealed-for-life 10 year Panasonic lithium battery that switches on automatically when the alarm is twisted onto its base plate. A red LED flashes every 45 seconds to show it is active. The large central button handles the weekly test, Smart Silence (hushes a known false alarm for up to 10 minutes) and Locate (silences every alarm except the one that detected smoke). An optional locking base plate helps prevent tampering or removal.

Specifications

• Sensor: Thermoptek multi-sensor (optical with thermal enhancement)
• Power: 3V DC sealed lithium battery, 10 year life
• Sounder: 85dB(A) at 3m
• Wireless: Wi-Safe 2, 868 MHz, up to 35m between alarms (over 200m in clear air), up to 50 devices
• Operating temperature: +4C to +38C
• Size: 132mm diameter x 40.5mm deep
• Weight: approx. 200g with base plate
• Standards: BS EN 14604:2005+AC:2008 (651d/12), suitable for Grade F1 installations to BS 5839-6
• Warranty: 5 year FireAngel warranty

In the box

• 1 x WST-630 smoke alarm
• 1 x base plate
• 2 x screws and fixing plugs
• 1 x manual

Please note: this alarm only interlinks with FireAngel Wi-Safe 2 products, not wireless alarms from other brands. In new builds it gives additional protection and does not replace a hard-wired system required by building regulations.