LavaTap 1/2 Inch Brass Garden Tap Kit with 20 mm MDPE Wall Plate Elbow and PTFE Tape

Product description

• Outdoor tap kit: Includes a 1/2 inch brass garden tap, 20 mm x 1/2 inch MDPE wall plate elbow and PTFE tape for creating an outdoor water point
• For 20 mm MDPE pipe: Wall plate elbow is designed to connect compatible 20 mm MDPE pipe to a 1/2 inch outside tap installation
• Brass garden tap: Traditional bib tap with a T handle and hose tail outlet, suitable for garden watering, filling buckets and everyday outdoor cleaning
• Wall mounted connection: MDPE elbow creates a secure wall or post mounted tap point for gardens, allotments, garages, sheds, workshops and outdoor areas
• PTFE tape included: Wrap the tap thread with sufficient PTFE tape before fitting so the tap tightens securely with the outlet facing down
• Check before fitting: Kit does not include MDPE pipe, pipe insert, hose pipe, hose connector, screws, wall plugs or additional installation fittings

The LavaTap outside tap kit is designed for creating a practical outdoor water point using compatible 20 mm MDPE pipe. The kit includes a 1/2 inch brass garden bib tap, a 20 mm x 1/2 inch MDPE wall plate elbow and a roll of PTFE tape, making it suitable for outdoor tap installations where the main pipework and additional fittings are already in place.

The brass bib tap features a traditional T handle and hose tail outlet, making it useful for everyday outdoor jobs such as garden watering, filling buckets, rinsing tools, cleaning patios and supplying water to sheds, workshops, allotments, garages, paddocks and other outdoor utility areas. The hose tail outlet can be used with a suitable hose setup or compatible hose fittings depending on your installation.

The included MDPE wall plate elbow is designed for use with compatible 20 mm MDPE pipe and provides a fixed connection point for the 1/2 inch tap. It can be installed on a suitable wall, post or outdoor mounting surface, helping create a tidy and practical outside water access point.

A roll of PTFE tape is included for the threaded tap connection. Before fitting, wrap the tap thread with sufficient PTFE tape so the tap tightens securely in the correct position with the hose outlet facing down. Check the alignment before final tightening and avoid over tightening.

This listing includes 1 x 1/2 inch brass bib tap, 1 x 20 mm x 1/2 inch MDPE wall plate elbow and 1 x roll of PTFE tape. It does not include MDPE pipe, pipe insert, hose pipe, hose connector, jubilee clip, screws, wall plugs or additional plumbing fittings. Please check your pipe size, thread size and installation requirements before purchase.