• Press Tool Required - Not Push Fit: This is an M Profile press fit fitting. You need a compatible press gun and M22 jaw to compress the press end. The male spigot end inserts into another M Profile press fitting directly. Pack of 10 supplied.

• Press x Male Spigot - 45 Degree Offset: One end is a standard M Profile press socket. The other is a male spigot for direct insertion into another press fitting - reducing the total fitting count on a 45 degree direction change.

• Where to Use It: Use the street elbow where you need a 45 degree offset and the fitting connects directly into an adjacent press fitting - for example, off a tee branch or out of a reducer - without a short pipe section between them.

• WRAS, DVGW and BSI Approved: Certified for hot and cold water, vented and unvented heating systems, and chilled water. Rated to 16 bar from -24 deg.C to 110 deg.C. Compatible with BS EN 1057 R250 and R290 copper tube.

• EPDM O-Ring on the Press Socket End: Deburr the pipe end and insert to depth before pressing. The male spigot seals inside the receiving fitting.

• No Naked Flame - No Hot Works Permit: No solder, no flux, no open flame. Unpressed joints leak visibly at your pressure test before any pipework is concealed. 25-year manufacturer guarantee.

The LavaPlumb Copper Pressfit 45 Degree Street Elbow offsets pipe direction by 45 degrees, with a press socket on one end and a male spigot on the other. The male spigot inserts directly into an adjacent M Profile press fitting - a tee, coupler, or reducer - eliminating the need for a short pipe section between them. This keeps the fitting arrangement compact where space is tight. Press the socket end with a compatible M22 jaw and press gun. The spigot end seals inside the receiving press fitting. EPDM O-Ring on the press socket end: Deburr the pipe end and insert to depth before pressing. No solder, no flux, no open flame. Unpressed joints leak at your pressure test before pipework is concealed. WRAS Approved. DVGW Approved. BSI Approved. 16 bar from -24 deg.C to 110 deg.C. BS EN 1057 R250 and R290 compatible. 25-year guarantee. This listing supplies a pack of 10 fittings.