• MAPP Gas for Blow Torch Soldering: 6 x 400g Salvus MAP-HTi cylinders - the hotter alternative to propane for soldering copper pipe, brazing and heat treatment work
• Flame Temperature Up To 1,985C: Burns considerably hotter than the standard propane most blow torches run on, bringing joints up to soldering temperature faster
• 99.5% Pure Propylene: High purity gas is non-corrosive, will not degrade your torch's sealing rings, and prevents contaminant build-up in the torch connection
• Around 16 Hours Of Gas: A measured gas flow of 4g per minute gives roughly 160 minutes per 400g cylinder, so the 6 pack trade case holds around 16 hours of working time
• Strong Cold Weather Performance: A higher working pressure keeps the flame stable on winter sites and in unheated lofts, where propane output drops off
• Fits Standard Torch Heads: CGA600 threaded connection suits the Salvus Turbo Torch and most popular propane and MAPP style blow torches

Salvus MAP-HTi is a high performance MAPP gas for blow torch work, supplied here as a 6 pack trade case of 400g cylinders. It is a clean, pure 99.5% propylene that reaches a maximum flame temperature of 1,985C - considerably hotter than the propane most blow torches run on - so copper joints reach soldering temperature faster and with less waiting about.

Because the gas is 99.5% pure it burns clean. It is non-corrosive, so it will not degrade the sealing rings in your torch, and its purity prevents contaminant build-up in the torch connection - a common cause of weak flame and blocked jets with cheaper gases. A higher working pressure also means it keeps performing in cold weather, on winter sites and in unheated lofts where propane falls off.

Gas flow is a measured 4g per minute, giving around 160 minutes of working duration from each 400g cylinder - around 16 hours across the 6 pack trade case. The standard CGA600 threaded connection fits the Salvus Turbo Torch and most popular propane and MAPP style blow torch heads, so it drops straight into the kit most plumbers already carry.

Ideal for soldering and brazing copper pipe, heat treatment, and freeing seized nuts and bolts. Warning: extremely flammable gas. May displace oxygen and cause rapid suffocation. Contains gas under pressure which may explode if heated.