• 30 Fittings, 70 Pipe Connections: 10 x 90 degree elbows, 10 x equal tees and 10 x straight couplers, all 15mm, so one order covers bends, branches and straight joins
• WRAS Approved For Drinking Water: For potable hot and cold water supply under UK water regulations, plus central and underfloor heating, in new builds, renovations and repairs
• Tool-Free Installation: No special tools needed, simply push the pipe fully into the fitting to make a secure, watertight joint, ideal for plumbers and DIYers alike
• O-Ring And Stainless Steel Locking Ring: Every joint seals on a rubber O-ring and grips the pipe with a stainless steel locking ring, rated to a maximum of 12 bar at 20°C
• Copper, PEX And PB Pipe: Fits 15mm copper, PEX and polybutylene pipe. PEX or PB barrier pipe needs a 15mm insert in each pipe end, inserts not included and sold separately
• Demountable And Reusable: Fittings can be disconnected and reused when a system is altered or repaired, so spares left over from one job stay useful for the next

This LavaPlumb 15mm push fit fittings pack puts the three fittings you reach for most into one pack: 10 x 90 degree elbows, 10 x equal tees and 10 x straight couplers, 30 white fittings in total. It suits professional plumbers who want the common shapes in stock and DIYers taking on a bathroom, kitchen or heating job who would rather place one order than buy three separate packs.

The elbows turn a pipe run through 90 degrees, the tees branch one pipe into two and the couplers join two straight lengths. Every fitting seals with a rubber O-ring and grips the pipe with a stainless steel locking ring, and is rated to a maximum pressure of 12 bar at 20°C. The fittings are WRAS approved for potable hot and cold water supply and are also suitable for central heating and underfloor heating systems, in domestic and commercial installations.

Installation needs no special tools: push the pipe fully into the fitting to make a secure, watertight joint. The design is demountable, so fittings can be removed and reused when a system is altered or repaired.

The fittings are compatible with 15mm copper, PEX and polybutylene (PB) pipe. Plastic barrier pipe, including PEX and PB barrier pipe, needs a 15mm pipe insert in each pipe end to maintain the integrity of the joint. The pack has 70 pipe ends in total (two per elbow and coupler, three per tee), so a job done entirely in barrier pipe can need up to 70 inserts. Pipe inserts are not included and are sold separately.

In the box: 10 x 15mm push fit elbow, 10 x 15mm push fit equal tee, 10 x 15mm push fit straight coupler (30 fittings, white). Pipe inserts not included.

Why ours: the three core 15mm shapes arrive together in one order with one matching white finish, so you are not left a tee or coupler short halfway through a job.