22mm x 3/4 Inch Compression Wall Plate Elbow Brass Embrass

22mm x 3/4 Inch Compression Wall Plate Elbow Brass

22mm x 3/4 Inch Compression Wall Plate Elbow Brass

Single Unit
Regular price £3. 49
Regular price Sale price £3 .49
Quantity
6 items available in stock

Trade customer? Log in to see your trade price, or open a trade account.

  • Free UK delivery over £90Order before 1pm Mon–Fri for same-day dispatch
  • 30-day returnsFree if faulty, damaged or wrong
  • Secure checkoutApple Pay, Google Pay and all major cards

Product Description

  • Fits 22mm Pipe to a 3/4 Inch Thread: Joins 22mm copper pipe to any 3/4" male BSP tap or fitting, ideal for outside taps, washing machine and appliance feeds and larger bib taps
  • No Leaks, No Soldering: Compression joint with brass nut and copper olive makes a watertight seal with just two spanners, no blowtorch needed
  • In the Box: 1 brass wall plate elbow with compression nut and olive. Add PTFE tape on the tap thread and suitable screws and plugs for the wall
  • Easy to Fit: Triangular 3 hole backplate screws flat to brick, block or timber so the tap stays rigid and does not twist when you turn it
  • Solid Brass to EN1254-2: Hot pressed brass body stamped to the European standard for compression fittings on copper pipe in water systems
  • Size: 22mm compression inlet x 3/4" BSP female outlet at 90 degrees, so the pipe can run along or through the wall straight to the tap

Mount a tap firmly to the wall with this solid brass 22mm x 3/4" compression wall plate elbow. It joins 22mm copper pipe to any 3/4 inch male BSP tap or fitting at a neat 90 degree angle, and the triangular three hole backplate screws flat to the wall so the tap stays rigid every time it is turned on and off.

Typical uses: outside taps, washing machine and appliance feeds and larger bib taps, and any job where pipework needs to finish at a fixed point on a wall, inside or outside.

Specifications:

  • Inlet: 22mm compression (brass nut and copper olive)
  • Outlet: 3/4" BSP female thread
  • Angle: 90 degree elbow
  • Mounting: triangular backplate with 3 screw holes
  • Material: hot pressed brass
  • Standard: stamped EN1254-2 (compression fittings for copper pipe)

Fitting is simple. Cut the pipe square, slide on the nut and olive, push the pipe fully into the elbow and tighten the nut with two spanners. No soldering or blowtorch is needed. Wrap PTFE tape around the tap thread, screw the tap into the female outlet and fix the backplate to the wall with suitable screws and plugs.

In the box: 1 x 22mm x 3/4" brass compression wall plate elbow with nut and olive. Screws, plugs, PTFE tape and the tap are not included.

Your Bag

Empty Cart

Your cart is empty

Go find the products you like.
Continue shopping
Reviews

Product description

  • Fits 22mm Pipe to a 3/4 Inch Thread: Joins 22mm copper pipe to any 3/4" male BSP tap or fitting, ideal for outside taps, washing machine and appliance feeds and larger bib taps
  • No Leaks, No Soldering: Compression joint with brass nut and copper olive makes a watertight seal with just two spanners, no blowtorch needed
  • In the Box: 1 brass wall plate elbow with compression nut and olive. Add PTFE tape on the tap thread and suitable screws and plugs for the wall
  • Easy to Fit: Triangular 3 hole backplate screws flat to brick, block or timber so the tap stays rigid and does not twist when you turn it
  • Solid Brass to EN1254-2: Hot pressed brass body stamped to the European standard for compression fittings on copper pipe in water systems
  • Size: 22mm compression inlet x 3/4" BSP female outlet at 90 degrees, so the pipe can run along or through the wall straight to the tap

Mount a tap firmly to the wall with this solid brass 22mm x 3/4" compression wall plate elbow. It joins 22mm copper pipe to any 3/4 inch male BSP tap or fitting at a neat 90 degree angle, and the triangular three hole backplate screws flat to the wall so the tap stays rigid every time it is turned on and off.

Typical uses: outside taps, washing machine and appliance feeds and larger bib taps, and any job where pipework needs to finish at a fixed point on a wall, inside or outside.

Specifications:

  • Inlet: 22mm compression (brass nut and copper olive)
  • Outlet: 3/4" BSP female thread
  • Angle: 90 degree elbow
  • Mounting: triangular backplate with 3 screw holes
  • Material: hot pressed brass
  • Standard: stamped EN1254-2 (compression fittings for copper pipe)

Fitting is simple. Cut the pipe square, slide on the nut and olive, push the pipe fully into the elbow and tighten the nut with two spanners. No soldering or blowtorch is needed. Wrap PTFE tape around the tap thread, screw the tap into the female outlet and fix the backplate to the wall with suitable screws and plugs.

In the box: 1 x 22mm x 3/4" brass compression wall plate elbow with nut and olive. Screws, plugs, PTFE tape and the tap are not included.

Customer reviews

Trusted by Leading Retailers