{"product_id":"lavatherm-4-port-stainless-underfloor-heating-manifold-16mm","title":"LavaTherm 4 Port Stainless Underfloor Heating Manifold 16mm","description":"\u003cbody\u003e\n\n\n\n\n\u003cul\u003e\n\u003cli\u003eCheck The Fit: 1 inch female threaded supply and return bars with 4 circuits at 50 mm centres, made for wet underfloor heating running 16 mm pipe\u003c\/li\u003e\n\u003cli\u003eBalance Every Room: A flow meter on each supply circuit reads 0 to 5 l\/min, so you can see and set the flow to every loop instead of guessing why one room stays cold\u003c\/li\u003e\n\u003cli\u003eWhat You Get: Supply and return bars with 8 pipe connectors fitted, 2 mounting brackets, 4 bar clamps with rubber liners and fixing screws. Add ball valves, pipe and actuators\u003c\/li\u003e\n\u003cli\u003eReady For Actuators: The return bar has an M30 x 1.5 thread under each blue cap, so M30 x 1.5 electric actuators screw straight on for room by room zone control\u003c\/li\u003e\n\u003cli\u003eBuilt To Last: Stainless steel bars rated to 10 bar and 90 °C for water systems, with an automatic air vent and a drain valve on each bar for filling, venting and draining\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCheck The Fit:\u003c\/strong\u003e 1 inch female threaded supply and return bars with 4 circuits at 50 mm centres, made for wet underfloor heating running 16 mm pipe\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBalance Every Room:\u003c\/strong\u003e A flow meter on each supply circuit reads 0 to 5 l\/min, so you can see and set the flow to every loop instead of guessing why one room stays cold\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWhat You Get:\u003c\/strong\u003e Supply and return bars with 8 pipe connectors fitted, 2 mounting brackets, 4 bar clamps with rubber liners and fixing screws. Add ball valves, pipe and actuators\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eReady For Actuators:\u003c\/strong\u003e The return bar has an M30 x 1.5 thread under each blue cap, so M30 x 1.5 electric actuators screw straight on for room by room zone control\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt To Last:\u003c\/strong\u003e Stainless steel bars rated to 10 bar and 90 °C for water systems, with an automatic air vent and a drain valve on each bar for filling, venting and draining\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCompact 4 Circuit Size:\u003c\/strong\u003e Each bar is about 29 cm long with 50 mm between ports, so it fits a slim cupboard or wall cavity and suits a single zone, extension or small floor area\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eRun water underfloor heating in up to four rooms or zones from one compact pair of stainless steel bars. This LavaTherm 4 port manifold has a supply bar with flow meters and a return bar ready for actuators, so you can balance each loop and control each room separately.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e stainless steel bars; 1 inch female threaded ends; 4 circuits at 50 mm centres; flow meters 0 to 5 l\/min on the supply bar; M30 x 1.5 actuator thread on the return bar; automatic air vent and drain valve on each bar; maximum working pressure 10 bar; maximum working temperature 90 °C; medium water.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e for wet underfloor heating with 16 mm pipe, connected through 1 inch ball valves to your pump and mixing set or heat source. The M30 x 1.5 return ports take M30 x 1.5 electric actuators for zone control with room thermostats.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e supply bar with 4 flow meters, return bar with 4 actuator caps, an automatic air vent and drain valve on each bar, 8 compression pipe connectors fitted, 2 mounting brackets, 4 bar clamps with rubber liners and fixing screws. Ball valves, pump, mixing valve, pipe and actuators are sold separately.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy LavaTherm:\u003c\/strong\u003e the flow meters show the flow on every circuit, so balancing is quicker than trial and error. Each bar vents its own air and drains through its own valve, which keeps first fill and later maintenance simple. Stainless steel bars resist corrosion and keep their finish in a plant room or cupboard.\u003c\/p\u003e \n\n\u003c\/body\u003e","brand":"LavaTherm","offers":[{"title":"Default Title","offer_id":60154178797952,"sku":"600565","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/0629\/4936\/files\/3205b14f-03ad-4078-9a81-01d14f63008f.jpg?v=1792403515","url":"https:\/\/www.lavastore.co.uk\/products\/lavatherm-4-port-stainless-underfloor-heating-manifold-16mm","provider":"LavaStore","version":"1.0","type":"link"}