{"product_id":"lavaplumb-copper-pressfit-90-degree-elbow-28mm","title":"LavaPlumb Copper Pressfit 90 Degree Elbow - 28mm","description":"\u003cbody\u003e\n\n\n\n\n\u003cul\u003e\n\u003cli\u003ePress Tool Required  -  Not Push Fit: This is an M Profile press fit fitting. You need a compatible press gun and M28 jaw to compress both sleeves onto the copper tube. It cannot be hand-assembled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eChanges Pipe Direction by 90 Degrees  -  Press x Press: Both ends are 28mm press connections. Use it wherever your pipework needs to turn a right angle  -  around corners, through walls, or at a ceiling to wall transition.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWRAS, DVGW and BSI Approved: Certified for hot and cold water, vented and unvented heating systems, and chilled water. Rated to 16 bar from -24 deg.C to 110 deg.C. Compatible with BS EN 1057 R250 and R290 copper tube.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEPDM O-Ring on Both Ends: Each port has its own black EPDM sealing element. Deburr both pipe ends and insert to the correct depth before pressing each connection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo Naked Flame  -  No Hot Works Permit: No solder, no flux, no open flame. Turn corners in occupied buildings, timber-framed structures, and tight spaces without requiring hot works permits.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUnpressed Joints Show at Pressure Test: The fitting design ensures any unpressed connection leaks visibly before pipework is concealed. 25-year manufacturer guarantee against manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LavaPlumb Copper Pressfit 90 Degree Elbow changes the direction of a 28mm copper pipe run by 90 degrees.  Both ends are press x press connections. Press each one individually with a compatible M28 jaw and press gun. No solder, no flux, no open flame on either connection.  Where you need it:  Turning a corner at a wall, ceiling, or floor. Routing pipework around an obstacle. Any right-angle direction change in a copper pipe run.  EPDM O-Ring on both ends: Deburr the pipe end and insert to the correct depth before pressing. A sharp burr on the pipe edge is the most common cause of O-ring damage and subsequent leaks at press fit connections.  Unpressed joints leak visibly at your pressure test  -  you catch every missed connection before covering the pipework.  WRAS Approved. DVGW Approved. BSI Approved. 16 bar from -24 deg.C to 110 deg.C. BS EN 1057 R250 and R290 compatible. 25-year manufacturer guarantee.\u003c\/p\u003e\n\n\u003c\/body\u003e","brand":"LavaPlumb","offers":[{"title":"Default Title","offer_id":58498852028800,"sku":"12000217","price":3.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/0629\/4936\/files\/3f1852ef-9718-4a81-a9f7-474511cbd03f.jpg?v=1784555425","url":"https:\/\/www.lavastore.co.uk\/products\/lavaplumb-copper-pressfit-90-degree-elbow-28mm","provider":"Lavastore","version":"1.0","type":"link"}